STEP 38: PICNIC TABLE
1: MEASURE 18” FROM THE GROUND UP AND MARK THIS POINT ON THE CORNER POST.
2: ATTACH THE BENCH SUPPORT TO THE OUTSIDE OF THE CORNER POST SO THAT THE TOP IS AT 18” FROM THE
GROUND. ATTACH IT WITH THREE 2-1/2” WOOD SCREWS IN EACH END, THEN LEVEL BENCH SUPPORT AND ATTACH IT
TO THE VERTICAL SUPPORT ON EACH SIDE.
3: REPEAT THESE STEPS FOR THE OPPOSITE SIDE OF THE PLAY SET.
BENCH SUPPORT
2 X 4 X 23"
PICNIC TABLE
2-1/2" WOOD SCREW
ROCK WALL REMOVED FOR ASSEMBLY CLARIFICATION
To Next Page
Loading...
