Grace Cutie - Page 11

11
Cutie Frame
Insert a plastic track into each side of both plastic track supports. Then tighten the twelve
M4 x 20 mm ULPSHS screws from the previous step.
3
Task 1 - Assembling the Tracks (Continued)
On both cross supports: Use six M4 x 20 mm ULPSHS screws to attach two of the
plastic track supports. Do not tighten at this time.
2
Plastic Track
Support
ULPSHS
M4 x 20 mm
Plastic Track
Support
Plastic Track
Task 1 Completed: