44
Cutie Frame
Task 14 - Attaching your Quilt
Parts & Tools Needed:
Fabric Clamp (x3)
Side Fabric Clamp (x2)
Front Fabric Clamp
with Clip (x2)
Carry your rolled up quilt to your frame.
1
Instructions
Follow these instructions to attach your quilt to the frame:
2
Raise your needle and hopping foot. Slide
the top edge of the quilt under the hopping
foot on your sewing machine.
Pull a sucient amount of fabric over the
rails that the fabric clamps will be able to get
a good grip. Square up the edges of your
quilt with the frame rails.
3
Move your machine all the way to the back
left corner of your frame. If possible, adjust
your fabric so the edge of your quilt top lines
up with the needle. With most machines, this
is about 8 inches from the side rail.
4
To Next Page
Loading...
