Grace Cutie - Task 4 - Installing the Top Plate Clamps and Encoder Bracket

18
Cutie Frame
Task 4 - Installing the Top Plate Clamps and Encoder Bracket (Continued)
Open the top plate clamps and place
them into the slots in the top plate.
2
Slide the top plate clamps toward the top
plate edge. Close them to latch them in
place.
Top Plate
Clamps (x4)
3
If you will be using QuiltMotion automation, please follow “Part One” in your QuiltMotion
instruction manual. If you do not have QuiltMotion automation, go to “Part Two” of this manual.
Note: If you have purchased the Cutie Table and Legs accessory you can assemble it now. If you
have purchased the Cutie channel locks, these can be installed now.
Task 4 Completed: