35
Cutie Frame
Task 10 - Adjusting the Carriage Stop Bracket
Slide the machine back until there is about half an inch of space between the needle and the
take-up rail.
2
1/2 Inch of
Space
Loosen the knob on the carriage stop bracket by turning it counter clockwise and then slide the
knob and stopper towards the rear of the bracket.
1
Hold the machine in place to keep the half-inch distance between the needle and take-up rail.
Slide the stopper along the bracket until it rests against the wheel of your top plate or
machine. Tighten the knob in place.
3
Stopper
Instructions
Follow these steps to adjust the carriage stop to prevent your machine from hitting the take-up rail.
To Next Page
Loading...
