52
Cutie Frame
Congratulations! Now that you have practiced
and gotten used to the frame and machine,
you are ready to begin your quilting journey.
If you are using a Q’nique quilting machine,
continue to Part Three of your machine
instruction manual for more detailed
information on specic stitching modes that
you can use to create your projects.
Practice! Keep trying dierent stitches
until you feel comfortable with how your
machine feels and moves. You can always
attach a new piece of practice fabric if you
need to.
7
You may now cut the thread tails from the
beginning of the design. Cut your thread
at the tie-o, and move on to your next
design.
6
Make a single stitch over the tie-o.
c
Hold the loop and move the machine
away from the tie-o again.
d
Keep moving away from the tie-o until
a loop of bobbin thread is pulled up
above the fabric. Cut all threads close to
the tie-o.
e
Task 16 - Getting Started (Continued)
To Next Page
Loading...
