EasyManuals Logo

Graco 482 Series User Manual

Graco 482 Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
310543 5
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
Ground the equipment and the object being sprayed. See Ground the System on page 6.
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvent or the fluid being
dispensed.
Extinguish all the open flames or pilot lights in the dispense area.
Electrically disconnect all the equipment in the dispense area.
Keep the dispense area free of debris, including solvent, rags, and gasoline.
Do not turn on or off any light switch in the dispense area while operating or if fumes are present.
Do not smoke in the dispense area.
Do not operate a gasoline engine in the dispense area.
If there is any static sparking while using the equipment, stop dispensing immediately. Identify
and correct the problem.
TOXIC FLUID HAZARD
Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on the
skin, swallowed, or inhaled.
Know the specific hazards of the fluid you are using. Read the fluid manufacturer s warnings.
Store hazardous fluid in an approved container. Dispose of the hazardous fluid according to all
local, state, and national guidelines.
Wear appropriate protective clothing, gloves, eyewear, and respirator.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco 482 Series and is the answer not in the manual?

Graco 482 Series Specifications

General IconGeneral
BrandGraco
Model482 Series
CategoryControl Unit
LanguageEnglish

Related product manuals