Storage
30 3A9019A EN
Storage
With proper storage, the sprayer will be
ready to use the next time it is needed.
Short Term Storage
(up to 2 days)
1. Remove battery, see Battery
Installation and Removal, page 14.
2. Leave Suction Tube and Drain Tube in
paint pail.
3. Cover paint and pail tightly with plastic
wrap.
4. Engage trigger lock.
5. Leave gun attached to hose.
6. Remove Spray Tip and Spray Tip Guard
and clean with water or flushing fluid
and a brush.
7. Wipe paint off outside of gun using a soft
cloth moistened with water or flushing
fluid.
Long Term Storage
(more than 2 days)
Pump Armor
TM
fluid protects the sprayer
against freezing and corrosion.
• Do not store the sprayer full of water.
• Do not allow water to freeze in sprayer.
• Do not store sprayer under pressure.
• Store sprayer indoors.
1. Perform Cleanup, page 25.
2. Remove Pump Armor bottle cap and foil
seal.
To Next Page
Loading...
Need help?
General
