Reference
32 3A9019A EN
Reference
Lacquer Conversion Kit
To spray flammable materials, you must
purchase a lacquer conversion kit. Contact
customer service for lacquer conversion kit
part number.
Follow Grounding Instructions, page 11,
when spraying oil-based or flammable
materials.
Cleaning Fluid
Compatibility
• When spraying water-based materials,
flush the system thoroughly with water.
• When spraying oil-based or flammable
materials, flush the system thoroughly
with mineral spirits or compatible
flushing solvent. When flushing with
solvents, always follow Grounding
Instructions, page 11.
• To spray water-based materials after
spraying oil-based or flammable
materials and flushing with mineral
spirits or compatible solvents, flush the
system thoroughly with water first. The
water flowing out of drain tube should
be clear and solvent-free before you
begin spraying the water-based
material.
• To spray oil-based or flammable
materials after spraying water-based
materials and flushing with water, flush
the system thoroughly with mineral
spirits or a compatible flushing solvent
first. The solvent flowing out of the drain
tube should not contain any water.
When flushing with solvents always
follow Grounding Instructions, page
11.
• To avoid fluid splashing back on your
skin or into your eyes, always aim gun at
inside wall of pail.
NOTICE
Spraying flammable materials without
installing the lacquer conversion kit will
damage your sprayer.
To Next Page
Loading...
Need help?
General
