Graco PR70 - Perform a Shot; Sequence Mode Operation

Parts
56 312394C
Electric Agitator Motor, Assemblies 255337 and 255338
† Part not shown.
2509
2501
2513
2511
2505
2502
2506
2508
2507
2511
2512
2504
2503
Assembly 255337 Shown
ti12584a
Ref Part Description Qty
2501 01/1198-2/97 FASTENER, standoff, agitator, hd, elec, alu 4
2502 01/2218/97 ENCLOSURE, agitator, electric, prmv/f, hd 1
2504 01/2219/97 PLATE, adapter, electric agitator, hd, prm 1
2505 81/2218-1/11 MOTOR, 50 rpm, 60 in-lb, 120V, 1.2A
(assembly 255337 only)
1
256613 MOTOR, assembly, 50 rpm, 60 in-lb, 230V
(assembly 255338 only)
1
2506 81/1040/11 MODULE, AC, 2P, 250V, 10A, double pull sin-
gle throw, with fuse
1
2507 81/1040-1/11 MODULE, AC conn, 2p, 250V, 10A, with bar 1
2508 81/1053-1.6/11 FUSE, 5 x 20 mm, 1.6A, time delay 1
2509 84/2215-A/11 COUPLING, alignment, 1 in. OD, HUB,
3/8 in. ID
1
2510 96/0212/99 FASTENER, button head cap screw,
10-24 x 0.50, mild steel
4
2511 96/0271/99 FASTENER, button head cap screw, 8-32 x
0.31, mild steel
8
2512 120907 WASHER, plain #10 4
2513 120961 SCREW, button head cap screw, 10-32 x
1.25 in., stainless steel
4
2514 † 121599 CORD, power, v-lock, C14/C13, 10A 1