Service
3A5413F 19
Valve Replacement
When replacing the entire Valve assembly,
use Valve Replacement Kit 25D904.
1. Follow Disassembly instructions, Steps
1 - 6, beginning on page 13.
2. Use a socket wrench to remove valve
assembly (14) from housing (FIG. 34).
Valve Replacement 25D904
a. Apply a thin film of oil on each o-ring.
b. Install new valve assembly (14) (Kit
25D904) in housing (FIG. 35).
Torque to 20 to 30 ft. lb (27.12 to
40.67 N•m).
c. To complete the metered dispense
valve reassembly, see Reassembly
instructions page 20.
FIG. 34
FIG. 35
To Next Page
Loading...
