Graco T2 User Manual

Parts - Model 295616
311882U 23
The T2 can be adapted for use in 250 gallon (946 liter)
totes. Tube Extension 24N451 increases the length by
6.25 in. (165 mm) to reach material in the bottom of
larger totes.
Ref Part Description Qty
1‡ 16V524 CAP, air cylinder
1
2‡ 157630 SPRING, tapered
1
3‡* 120212 PACKING, square
2
4 24J528 CYLINDER, air motor
1
5 262035 VALVE, air
1
5a* 15J539 GASKET, upper
1
5b* 121889 O-RING
3
5c 15J544 SPACER
3
5d 121610 SCREW
3
5e 16U730 CAP, air, valve
1
5f 15V554 HEAD, air valve
1
5g 15J546 DISK, air valve
1
5h* 160258 O-RING
1
5j* 722834 O-RING
1
17 CAP, air piston
1
19 15J548 PIN, dowel
1
20 SHAFT, transfer
1
21 24J535 PISTON, air
1
22 15J551 SPRING, compression
1
23 24J529 BASE, air motor
1
24* 159846 O-RING (green)
1
25 15J553 ROD, tie
3
26 24J530 FLANGE, mounting
1
27 15J555 NUT, hex
1
28* 15J556 GLAND, packing, (male)
1
29* 15J557 V-PACKING, PTFE
2
30* 15J558 GLAND, packing, (female)
1
31* 15J559 WIPER, ROD
1
32* 15C638 O-RING, PTFE, encapsulated
1
33* 15J560 GASKET, PTFE
1
34 24J536 BODY, pump, 2:1
1
35 15J562 PACKING, piston cup
1
36 15J563 COLLAR, retaining
1
37 101194 SCREW, set, socket head,
10-32 x .25 in. (6 mm)
1
38 106258 O-RING
2
39 24J534 CYLINDER, fluid
1
40 15J565 PACKING, u-cup, PTFE
1
41
15J566 RING, wear
1
42 103462 BALL, outlet, sst, 3/4 in. (19 mm)
1
43 24J531 VALVE, piston
1
44 24J532 TUBE, suction
1
45 24J533 VALVE
1
46 120734 RING, retaining, internal
1
47 120735 RING, snap, e series
1
48† 206264 VALVE, needle
1
49† 169969 FITTING, air line
1
50* 108832 O-RING
1
51 253146 ADAPTER, bung
(includes 51a-51g)
1
51a 120998 O-RING, fluoroelastomer
1
51b ----------- ADAPTER
1
51c 234188 CLAMP, hopper
1
51h 120207 O-RING; inner (brown)
1
51J 26A699PKG HANDELS with jam nut
52† 114558 COUPLER, air line
1
53 15J570 HOUSING, piston
1
54 PISTON, upper
1
55 120294 PIN, clevis, 3/16 in. x 3/4 in.
2
56 120295 PIN, clevis, 3/16 in. x 1-1/4 in.
1
60 120348 SCREW, cap, socket head
1/4-20 x 1 in. (25 mm)
3
69† 15H197 TOOL, pin
2
70† 15K008 LABEL, material identification.
1
71 107167 BALL, intake, sst, 1 in. (25 mm)
1
72 116343 SCREW, ground
1
73 113944 O-RING
1
74 SHAFT, transfer, lower
1
75 24V858 GUARD
1
76‡ 111819 O-RING
1
77‡ 16V523 PIN, spring stop
1
* Parts included in Upper Seal Repair Kit 262034 (not sold
separately).
 Parts included in Lower Seal Repair Kit 247883.
NOTE: Seal Repair Kit 24X056 includes all parts in kit
262034 and kit 247883. The spring pins (55, 56) originally
supplied in series A and B pumps have been upgraded to a
solid clevis pin for improved reliability.
 Parts included in repair kit 256560
NOTE: The pump shaft originally supplied in series A
pumps has been upgraded to a multi-piece assembly for
better sealing and serviceability. Pumps can be upgraded
with repair kit 256560.
 Parts included in repair kit 262042
NOTE: The air valve originally supplied in series A pumps
can be upgraded with kit 262042.
† Indicates parts not shown, 48, 49, 52, 69, 70
(shipped loose)
 O-rings included in Tube Extension Kit 24N451.
‡ Parts included in air cap 24T043
NOTE: The cylinder cap has been upgraded with spring
stop for improved reliability. Existing pumps can be
upgraded with Kit 24T043.
Ref Part Description Qty

Graco T2 Specifications

General

Brand	Graco
Model	T2
Category	Water Pump
Language	English