7
Displays the weight on the scale platform.
In HOLD mode, the reading is shown intermittently to signal that it is not indicating the real weight on the scale but the la
test
stable weight recorded.
Unit of measurement in which the weight is indicated.
Piece counter mode: The display shows the number of units, not the weight.
Stable weight reading: There is a weight on the platform that is not fluctuating. Intermittent or switched off to indicate
that there is movement in the scale.
Negative sign.
This reading may be negative if a tare is activated (in preset tare mode) or to indicate a problem when setting it to zero.
Indicates net weight. The net weight is the real weight on the scale minus the tare. It is only displayed if a tare has been used.
Tare activated.
The reading flashes when “normal” tare mode has been activated.
A “preset” tare is retained even after the weight is removed from the scale platform.
Tare in memory. The tare being subtracted from the
weight is a value recorded in the indicator memory, not necessarily a
Scale set to zero: The weight on the load receptor is lower than ¼ interval (division).
resolution mode. It shows a division 10 times smaller than the one defined in the weighing scale range.
In double range mode, it indicates that the scale’s range 1 is being used.
In double range mode, it indicates that the scale’s range 2 is being used.
The weight is below the lower limit.
The 4 segments of this indicator are activated proportionally to the difference between the weight on the scale and the value
of
the lower limit. The thickest segment indicates that the
weight is lower than the value set as the lower limit in a proportion of 100%
The weight is within the interval encompassed between the lower limit and the upper limit.
The weight is above the upper limit.
The 4 segments of this indicator are activated proportionally to the difference between the weight on the scale and the value
of
the upper limit. The thickest segment indicates that the weight is higher than the value set as the upper limit in a proportion of
100% or more.
Battery-operated. Not connected to the mains. The load level is indicated.
AC/DC supply connected to the power outlet.
To Next Page
Loading...
Need help?
General
