Figure 8: GXV3350 Wi-Fi Hotspot
Basic
Sound
Use the Voice settings to configure the phone’s sound mode, volume, ring tone and notification tone.
Silent mode. Tap on it to turn on/off the sound from speaker when there is an incoming call.
HDMI. Enable/disable audio switch between the phone and the HDMI output connected device (e.g. TV). When enabled,
the TV will be used for audio output.
Media Volume. Adjust the sound volume for media audio
Alarm Volume. Adjust the alarm ring volume
Ring Volume. Adjust the phone ringing volume
Notification Volume. Adjust the notification sound volume
Ringtone. Select phone’s ringtone for incoming call.
Default Notification Ringtone. Select notification ringtone.
Default Alarm Ringtone. Select the alarm ringtone
Other Sounds. Enable/disable Dial pad Tones, Screen locking sounds, Touch sounds and Button tones.
Display
Brightness level. Tap on Brightness and scroll left/right to adjust the LCD brightness.
Screen timeout. Tap to open the dialog to set the screen timeout interval.
Screensaver timeout. Tap to set the screensaver timeout interval.
Screensaver. Enable/disable the screensaver. Two options are available:
Clock: If the clock is set as screensaver, tap on and set the clock style and the Night Mode
Screensaver: If screensaver is set, please tap on to set use a network images or use local images as screensaver and
set the Animation Interval between the images.
Font size. Tap on it to adjust the font size for LCD screen.
Using Server Wallpaper. Enable/disable the use of wallpaper from a URL.
Server Wallpaper Path. Enter the server wallpaper path.
To Next Page
Loading...
