Grandstream Networks GHP6 Series - System Application;Ldap Book

System Application/LDAP Book
Connection Mode Selects which protocol will be used for LDAP searching, LDAP or LDAPS.
Server Address Configures the URI of the LDAP (Lightweight Directory Access Protocol) server.
Port Configures the LDAP server port. The default LDAP port number is 389.
Base DN
Determines the LDAP search base. This is the location in the directory where the search is requested
to begin.
Example:
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
User Name
Configures the bind “Username” for querying LDAP servers. Some LDAP servers allow anonymous
binds in which case the setting can be left blank.
Password
Specifies the bind “Password” for querying LDAP servers. The field can be left blank if the LDAP
server allows anonymous binds.
LDAP Name
Attributes
Configures the “name” attributes of each record which are returned in the LDAP search result. This
field allows the users to configure multiple space separated name attributes.
Example:
cn sn description
LDAP Number
Attributes
Configures the “number” attributes of each record which are returned in the LDAP search result. This
field allows the users to configure multiple space separated number attributes.
Example:
telephoneNumber
telephoneNumber Mobile
LDAP Mail
Attributes
Determines the “mail” attributes of each record which are returned in the LDAP search result.
Example: mail
LDAP Name Filter
Configures the filter used for name lookups.
Examples:
(|(cn=%)(sn=%)) returns all records which has the “cn” or “sn” field starting with the entered prefix;
(!(sn=%)) returns all the records which do not have the “sn” field starting
with the entered prefix;
(&(cn=%) (telephoneNumber=*)) returns all the records with the “cn” field starting with the entered
prefix and “telephoneNumber” field set.