Grandstream Networks GHP6 Series - Need Support?

Import
Custom
Certificate
Allows to upload a Custom Certificate file to phone.
Custom
Certificate
Lists trusted Custom Certificate previously uploaded. Administrator can delete a certificate from here.
Table 26: System Settings/Security Settings
System Settings/Preferences
LCD & LED Management
Enable Missed Call
Backlight
If set to “Yes”, LCD backlight will be turned on when there is a missed call on the phone.
The default setting is “Yes”.
Note: Reboot is required for the setting to take effect
Enable Missed Call
Indicator
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when there is missed call
on the phone.
Default setting is “Yes”.
Enable MWI
Indicator
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when there is new
voicemail on the phone. If it set to “No”, the LED indicator will keep off if the phone system receives SIP
NOTIFY message about unread voice mail.
The default setting is “Yes”.
Enable New Message
Indicator
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when there is new
message on the phone.
Default setting is “Yes”.
Enable Contact Full
Indicator
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when the contact storage
or message storage is full.
The default setting is “Yes”.
Enable Indicator
When LCD is Off
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when the LCD screen is
off. If it set to “No”, the LED indicator will keep off when the LCD screen is off.
The default setting is “Yes”.
Screen Timeout Configures the timeout interval of the LCD backlight. If set to "never", the screen will always stay on.
Screensaver Timeout Configures the screensaver timeout.
Peripherals Interface Management
HDMI Output Control
Defines whether to enable HDMI. If enabled, users need to set whether HDMI would synchronize with LCD. If
set to “HDMI Display Synchronization with LCD”, HDMI device will display the same content as the phone
LCD;
If set to “Show based on the mode”, HDMI device displays as follows when in video call:
* PIP mode: The larger video screen is displayed.
* Fullscreen mode: The full screen is displayed.
* Demo mode: The demo screen is always displayed.
* When not in video call, it will display same content as phone LCD screen.
This setting will take effect in the next call.
Enable Touch Keys
Configures whether to enable touch keys. Once disabled, the five keys "Volume-, Volume +, Home, Menu and
Back" will not take effect.
Default is enabled.