Grandstream Networks GHP6 Series - Extension Boards

Event List URI
Determines the event list BLF URI on the phone to monitor the extensions in the list with MPK
keys. This feature is based on BroadSoft standard. It requires filling in the BLF ID to the box.
For example, if the server provides the URI: BLF123@myserver.com, this field should be filled
with BLF123. Then the monitored extensions will be populated in the MPK app or Extension
Board (if supported).
Force BLF Call-pickup by
Prefix
Uses the prefix for BLF Call-pickup. The default setting is “No”.
Table 33: Applications/Programmable Key
Extension Boards
When plugged in extension boards, the configuration page will be Extension Boards automatically. And the Programmable
Key APP wouldn’t be usable through LCD.
Entenxion Boards-EXT
Key Mode
The key modes are:
● Speed Dial: Press to dial the User ID when the accounts being configured as VPK.
● Busy Lamp Field: Monitor the User ID status when the accounts being configured as VPK.
● Call Transfer: Transfer the current active call to User ID when the accounts being configured as VPK.
● Call Intercom: Intercom/paging to the User ID when the accounts being configured as VPK.
● Speed Dial via Active Account: Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is offhook and account 2 is active, it will call the User ID when the accounts being
configured as VPK.
● Dial DTMF: Dial the DTMF digits of the User ID when the accounts being configured as VPK during the call.
● Call Park: Configure the call park feature code to park/retrieve call.
● Multicast Paging: For multicast sending, please fill in the display name in the Settings and fill in the sending
address in the multicast address.
● Quick Conference: Quickly dial up multiple numbers to set up a meeting.
● Dial Prefix: After configured, once pressed this key, all numbers use this account will automatically add the
prefix promptly.
Account Configures the SIP account for the Programmable Key.
Display Name Configures the display name for the Programmable Key.
Number Configures the number used by the corresponding Programmable Key mode for the Programmable Key.
DTMF Content When key mode is set to Dial DTMF it configures the dialed DTMF content.
Address When key mode is set to Multicast Paging, it configures the multiple broadcast address.
Conference name Set the name of speed meeting when the key mode is set to Quick Conference.
Mute all memebers Enable or disable mute all meeting members when key mode is set to Quick Conference.
Configure Configures the Number list when key mode is set to Quick Conference.
General Settings
General Settings