General
Settings
Sort
Phonebook
by
Sets which part of name, first name or last name, will be sorted in alphabetical order to display.
Default
Contacts
Tab
Controls the behaviors of the phonebook key. It could be set to:
Default
LDAP Search
Local Phonebook
Local Group
Broadsoft Phonebook
Favorites.
The default setting is “Default”, which set the phonebook key to the Contacts menu.
One Page Display
Mode
Configures whether to enable one page display mode. If set to "Yes", each extension board only shows 20
programmable keys, so keys 1-80 will be displayed on 4 extension boards.
Sync Backlight with
LCD
Configures whether to synchronize the backlight with LCD. If set to "Yes", the backlight will turn off when LCD is
in idle
EXT Sync Prompt When accessing EXT, configures whether to pop up the EXT synchronization prompt.
Enable Active MPK
Page
When enabled, GBX20 will auto swtich to the page that there are active MPKs. When unchecked, the user needs to
press the GXB20 buttons to switch MPK pages. It is enabled by default.
Hide BLF Remove
Status
Configures to hide the status information of the monitored line. When checked, BLF LED would not update
whether they are in a call or have an incoming/outgoing call. It is disabled by default.
Proxy Prefix
Account Displays account name if configured, otherwise, displays “Account X” where X is the account number.
BLF Call-pickup
Prefix
Configures the prefix prepended to the BLF extension if the phone answers a call to the monitored party by the
BLF key. Default setting is ** for each account.
Eventlist BLF URI
Determines the event list BLF URI on the phone to monitor the extensions in the list with MPK keys. This feature
is based on BroadSoft standard. It requires filling in the BLF ID to the box.
For example, if the server provides the URI: BLF123@myserver.com, this field should be filled with BLF123.
Then the monitored extensions will be populated in the MPK app or Extension Board (if supported).
Force BLF Call-
pickup by Prefix
Uses the prefix for BLF Call-pickup. The default setting is “No”.
To Next Page
Loading...
