EasyManua.ls Logo

Grandstream Networks GHP6 Series - Maintenance; Network Settings; PPPoE Settings

Grandstream Networks GHP6 Series
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Boot Version Booting code version.
Kernel Version The kernel version.
CPE Version The CPE version.
System Up Time System up time since the last reboot.
Table 8: Status/System Info
Account Page Definitions
GXV3350 has 16 lines that can be configured to accommodate 16 independent SIP accounts. Each SIP account has an
individual configuration page.
Account/General Settings
Account/SIP Settings
SIP Basic
Settings
SIP
Registratio
n
Allows the phone system to send SIP REGISTER messages to the proxy/server. The default setting is “Yes”.
Unregister
before
New
Registratio
n
Controls whether to clear SIP user’s information by sending un-register request to the proxy server. When
set to “All”, the un-registration is performed by sending a REGISTER message with “Contact” header set to *
and Expires=0 parameters to the SIP server when the phone starts pre-registration after rebooting. If set to
“Instance”, the phone only cleans the current SIP user’s info by sending REGISTER message with “Contact”
header set to concerned SIP user’s info and Expires=0 parameters to the SIP server. The default setting is
“Instance”.
Register
Expiration
(m)
Configures the time period (in minutes) in which the phone refreshes its registration with the specified
registrar. The default setting is 60. The maximum value is 64800 (about 45 days).
Subscribe
Expiration
(m)
Specifies the frequency (in minutes) in which the phone refreshes its subscription with the specified registrar.
The maximum value is 64800 (about 45 days). Default value is 60.
Re-register
before
Expiration
(s)
Specifies the time frequency (in seconds) that the phone sends re-registration request before the Register
Expiration. The default setting is 0. The range is from 0 to 64,800.
Registratio
n Retry
Wait Time
(s)
Configures the time period (in seconds) in which the phone will retry the registration process in the event
that is failed. The default setting is 20. The maximum value is 3600 (1 hour).

Table of Contents

Other manuals for Grandstream Networks GHP6 Series

Related product manuals