Key Mode
The key modes are:
Speed Dial: Press to dial the User ID when the accounts being configured as VPK.
Busy Lamp Field: Monitor the User ID status when the accounts being configured as
VPK.
Call Transfer: Transfer the current active call to User ID when the accounts being
configured as VPK.
Call Intercom: Intercom/paging to the User ID when the accounts being configured as
VPK.
Speed Dial via Active Account: Similar to Speed Dial but it will dial based on the current
active account. For example, if the phone is offhook and account 2 is active, it will call the
User ID when the accounts being configured as VPK.
Dial DTMF: Dial the DTMF digits of the User ID when the accounts being configured as
VPK during the call.
Call Park: Configure the call park feature code to park or retrieve the call.
Multicast Paging: For multicast sending, please fill in the display name in the Settings
and fill in the sending address in the multicast address.
Speed Conference: Quickly dial up multiple numbers to set up a meeting.
Dial Prefix: After configured, once pressed this key, all numbers use this account will
automatically add the prefix promptly.
Account Configures the SIP account when the accounts being configured as VPK.
Display Name Configures the display name when the accounts being configured as VPK.
User ID
Configures the User ID for the corresponding VPK mode when the accounts being configured
as VPK.
DTMF Content When key mode is set to Dial DTMF it configures the dialed DTMF content.
Address When key mode is set to Multicast Paging, it configures the multiple broadcast address.
Conference name Set the name of speed meeting when the key mode is set to Quick Conference.
Mute all members Enable or disable mute all meeting members when key mode is set to Quick Conference.
Configure Configures the Number list when key mode is set to Quick Conference.
Programmable key
General Settings
Enable LCD Turn on
Automatically when
BLF/SCA status changes
Configures whether to enable LCD turn on automatically when BLF/SCA status changes.
Account
Displays account name if configured, otherwise, displays “Account X” where X is the account
number.
BLF Call-pick Prefix
Configures the prefix prepended to the BLF extension if the phone answers a call to the
monitored party by the BLF key. Default setting is ** for each account.
To Next Page
Loading...
