HTTP/HTTPS Password Configure the password for the config HTTP/HTTPS server.
Always send HTTP Basic Authentication
Information
Include configured user name and password in HTTP request before receiving
authentication challenge from the server.
Default is “No”.
Config File Prefix
Check if configuration files are with matching prefix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Config File Postfix
Check if configuration files are with matching postfix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Authenticate Conf File
Sets the phone system to authenticate configuration file before applying it. When
set to “Yes”, the configuration file must include value P1 with phone system’s
administration password. If it is missed or does not match the password, the phone
system will not apply it.
The default setting is “No”.
XML Config File Password
Decrypt XML configuration file when encrypted. The password used for
encrypting the XML configuration file is using OpenSSL.
GUI Customization File
Configure Manually
Upload GUI Customization File
Uploads the customization file to the phone
Note: To create the customized configuration file please access the Grandstream
GUI Config tool : http://tools.grandstream.com:8081/#/
Configure via Network
GUI Customization File Download Mode
Select the download method: TFTP, HTTP or HTTPS.
Default setting is “HTTPS”.
GUI Customization File URL
Set IP address or domain name of the GUI customization file server. The server
hosts a copy of the file to be installed on the phone. The Default setting is
fm.grandstream.com/gs.
GUI Customization File HTTP/HTTPS
User Name
Enter the username for the firmware HTTP/HTTPS server.
GUI Customization File HTTP/HTTPS
Password
Enter the password for the firmware HTTP/HTTPS server.
Use Configurations of Config File Server Retrieve and download customization file with the configuration of the config file.
Provision
Automatic Upgrade
Automatic Upgrade Specify when the firmware upgrade process will be initiated; there are 4 options:
● No: The phone will only do upgrade once at boot up.
● Check every minute: User needs to specify “Automatic Upgrade Check
Interval(m)” and “Hour of the day (0-23)”
● Check every day: User needs to specify “Hour of the day (0-23)”.
To Next Page
Loading...
