Figure 17: Factory Reset using LCD Menu
CHANGE LOG
This section documents significant changes from previous versions of user manuals for
GRP261x/GRP2624/GRP263x/GRP2670/GRP2650. Only major new features or major document updates are listed here. Minor
updates for corrections or editing are not documented here.
Firmware version 1.0.9.99
Added support for including the upgrade method in the firmware/config server path. [Config Server Path] [Firmware
Server Path]
Added support for playing remote ringtones via Alert-Info. [Match Incoming Caller ID]
Added support for FTP for downloading phonebook XML.[Enable Phonebook XML Download]
Added support for a trusted domain name list. [TRUSTED DOMAIN NAME LIST]
Added a prompt that displays when recording file storage is getting close to full. [Local Call Recording Feature]
Added ability to disable the call recording indicator on LCD when a recording is started by the other party [ENABLE CALL
RECORDING LCD INDICATOR]
Added support for increasing RTP jitter buffer target delay. [JITTER BUFFER TARGET DELAY]
Firmware version 1.0.9.83
Changed DHCP options 150/160/161 to all be enabled by default [DHCP 150/160/161]
Added support for EAP-PEAP with Microsoft servers. [802.1x Mode]
The “Release DHCP On Reboot” setting was changed to “No” by default. [Release DHCP On Reboot]
Added the ability to connect to the pre-configured default SSID “wp_master” on Wi-Fi-supported models [Auto-
Connection]
Added provision button on the top right corner of Web UI. [UPGRADING AND PROVISIONING]
Added ability to configure default input method for Contacts and LDAP. [DEFAULT INPUT METHOD]
Firmware version 1.0.9.74
Added the Energy Saving Feature. [Energy Saving]
Added Energy Saving Status Information. [Status Page Definitions]
Added a separate Programmable keys configuration section. [Programmable Keys Page Definitions]
Added a separate System settings configuration section. [System Settings page Definitions]
Added a separate Application settings configuration section. [Application Page Definitions]
Added a separate external service settings configuration section. [External Services Page Definition]
Added ability to define input fields in XML applications.[Application Page Definitions]
Added ability to reboot and provision to XML applications. [Application Page Definitions]
Added ability for voicemail VPK to dial into target’s mailbox. [Monitored Voicemail Access Number]
Added ability to configure X-switch-info SIP header. [X-Switch-Info]
The system Information page will now display the VPN IP address.[Status Page Definition]
To Next Page
Loading...
Need help?
General
