Then the message received in the outbound notification will look like this:
Your call from Daniel:2070 to Jasmine:2071 was forwarded to 777777 by reason unconditional.
Only attributes in curved braces will be replaced by the run-time value. Other content will remain the same as static text.
For each event, at most 3 notifications can be configured. In total, up to 75 notifications can be configured. The P-value for
each notification is listed in the below table.
Table 24: Action URL Notification P-values
UPGRADING AND PROVISIONING
Unified Firmware
The GRP2612 / GRP2612P / GRP2612W / GRP2613 / GRP2614 / GRP2615 / GRP2616 / GRP2624 / GRP2634 / GRP2670 /
GRP2650 support unified firmware for all GRP261X/GRP2624/GRP263x/GRP2670/GRP2650 models.
P Value Notification Value Format
P9920 Notification 1
String. Each P value consists of all the options configured for this notification.
Example 1 – Notification 1 for event “Call_Missed” to destination 1, with 2 extra Attributes
configured:P9920=eventName=Call_Missed&destName=destination1&subject=&msg=You
have a missed call from {remoteName}:{remoteNumber} on Line {line}, account {account}
at {time}.&extraAttrName1=extraAttrValue1&extraAttrName2=extraValue2
Example 2 – Notification 2 for event “Incoming_Call” to destination 2, with 2 extra Attributes
configured:
P9921=eventName=Incoming_Call&destName=destination2&subject=Incoming Call
Alert&msg=You have an {callType} call from {remoteName}{remoteNumber} on Line
{line}, account {account} at
{time}.&extraAttrName1=extraAttrValue1&extraAttrName2=extraAttrValue2
The BOLD strings in above examples are the actual values configured in each field for the
notification.
P9921 Notification 2
P9922 Notification 3
P9923 Notification 4
P9924 Notification 5
P9925 Notification 6
P9926 Notification 7
P9927 Notification 8
P9928 P9929
…
P9993
P9994
Notification 9
Notification 10
…
Notification 73
Notification 74
P9995 Notification 75
To Next Page
Loading...
Need help?
General
