Table 28: Action URL – Events and Dynamic Attributes
All above dynamic attributes’ value is generated by the phone system and can be used as dynamic attributes with a pair of
curved braces around them. For example, if the message body is specified as follows:
Your call from {remoteName}:{remoteNumber} to {localName}:{localNumber} was forwarded to {fwdNumber} by reason
{fwdReason}.
sipServer The SIP server address of the account
call-id The SIP dialog call ID
time The time stamp when the call is transferred
transferName Transferred party name
transferNumber Transferred party number
Transferred party
number
Line Line number associated with the call
account Account number associated with the call
remoteNumber The remote party number
remoteName The remote party name
localNumber The local party number
localName The local party name
sipServer The SIP server address of the account
call-id The SIP dialog call ID
Time The time stamp when the call is transferred
transferName Transferred party name
transferNumber Transferred party number
Register_Status registerStatus Account register status. The value can be “registered” or “unregistered”
Bootup_Complete N/A N/A
The dynamic attributes
in this row are common
attributes that can be
applied to all events
mac MAC address of the phone
phone_ip IP address of the phone
program_version Software version of the phone
hardware_version Hardware version of the phone
product Product name of the phone
language Display language on the phone
To Next Page
Loading...
Need help?
General
