EasyManuals Logo

Grandstream Networks GRP26 Series Administration Guide

Grandstream Networks GRP26 Series
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
OpenVPN® Transport
Specify the Transport Type of OpenVPN® whether UDP or TCP.
The default value is “UDP”
OpenVPN® CA
Click on “Upload” to upload the Certification Authority of OpenVPN®. For a new upload,
users could click on “Delete” to erase the last certificate, and then upload a new one.
OpenVPN® Certificate
Click on “Upload” to upload OpenVPN® certificate. For a new upload, users could click on
“Delete” to erase the last certificate, and then upload a new one.
OpenVPN® Client Key
Click on “Upload” to upload OpenVPN® Key.
For a new upload, users could click on “Delete” to erase the last certificate, and then upload a
new one.
OpenVPN® Cipher Method
Specifies the Cipher method used by the OpenVPN® server. The available options are:
Blowfish
AES-128
AES-256
Triple-DES
The default setting is “Blowfish”.
OpenVPN® Username Configures the optional username for authentication if the OpenVPN server supports it.
OpenVPN® Password Configures the optional password for authentication if the OpenVPN server supports it.
Additional Options
Additional options to be appended to the OpenVPN® config file, separated by semicolons.
For example, comp-lzo no;auth SHA25
Note: Please use this option with caution. Make sure that the options are recognizable by
OpenVPN® and do not unnecessarily override the other configurations above.
Network 🡪 SNMP Settings
Enable SNMP Enables/Disables the SNMP feature. Default settings is “No”.
Version
SNMP version. Select Version 1, Version 2 or Version 3.
Default is “Version 3”.
Port
SNMP port. The valid range is 161, 1025-65535.
The default value is “161”.
Community SNMP Community.
SNMP Trap Version
Choose the Trap version of the SNMP trap receiver.
Trap Version 1
Trap Version 2
Trap Version 3
The default is “Trap Version 2”.
SNMP Trap IP IP address of trap destination.
SNMP Trap port
Port of the SNMP trap receiver. The valid range is 162, 1025-65535. The default value is
“162”.
SNMP Trap Interval The interval between each trap sent to the trap receiver. The valid range is 1 1440.The

Other manuals for Grandstream Networks GRP26 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GRP26 Series and is the answer not in the manual?

Grandstream Networks GRP26 Series Specifications

General IconGeneral
BrandGrandstream Networks
ModelGRP26 Series
CategoryIP Phone
LanguageEnglish

Related product manuals