Figure 6: Packet Capture when running
CLICK-TO-DIAL
From GRP261x/GRP2624/GRP2634 Web GUI, users could dial out with the Click-to-Dial feature on the top of the Web GUI.
Before using the Click-To-Dial feature, make sure the option “Click-To-Dial Feature” under web GUI🡪Settings🡪Call Features
is turned on. If no account is registered, the icon will be in grey ; If the click to dial is disabled, but the account is
registered, the icon will be in green, and clicking on the icon will do nothing.
When clicking on the icon on the top menu of the Web GUI, a new dialing window will show for you to enter the number.
Once Dial is clicked, the phone will go off-hook and dial out the number from the selected account. Please see [Figure 7:
Click-to-Dial Feature]
Additionally, users could directly send the command for the phone to dial out by specifying the following URL in the PC’s web
browser, or in the field as required in other call modules.
http://ip_address/cgi-bin/api-make_call?phonenumber=1234&account=0&login=admin&password=admin
In the above link, replace the fields with
ip_address:
Phone’s IP Address.
phonenumber=1234:
The number for the phone to dial out
account=0:
The account index for the phone to make calls. The index is 0 for account 1, 1 for account 2, 2 for account 3, etc.
password=admin/123:
The admin login password or user login password of the phone’s Web GUI.
To Next Page
Loading...
Need help?
General
