● When using Peering scenario, on “System Number” field of the GRP260x specify the IP
address of the peered GDS37XX.
● When using Registration scenario and both GRP260x and GDS37XX are registered on the
same SIP server, specify the SIP extension of the GDS37XX on “System Number” field
on GXP16XX.
The “Access Password” on GRP260x should be matching “Remote PIN to Open the door” on
GDS37XX.
External Service 🡪 Call Center
Call Center Codes Set the disposition code and the unavailable code for quick selection on the phone side.
External Service 🡪 Broadsoft XSI
Authentication Login
Server Broadsoft XSI server address with protocol.
Port Port of the Broadsoft XSI server.
XSI Action Path
Configure the deployment path for Broadsoft XSI Actions. If it is empty, the path
“com.broadsoft.xsi-actions” will be used.
XSI Authentication Type
Defines the authentication type to use login credentials or SIP credentials. If set to “Login
Credentials”, please fill in User ID and Password in the following options; If set to “SIP
Credentials”, please fill in user ID, Authentication ID, and Authentication Password.
BroadSoft User ID Configures User ID for BroadSoft Xsi server.
Login Password Configures password for BroadSoft Xsi server
Service Settings
Sort Phonebook by Sort phonebook based on the selection of first name or last name.
BroadSoft Directory Update Interval
(m)
Configures the BroadSoft phonebook download interval (in minutes). If set to 0, automatic
download will be disabled. Valid range is 5 to 4320.
Broadsoft Contacts Download Limit
The maximum contacts that can be downloaded for each BroadSoft XSI server directory. The
valid range is from 0 to 2000. If set to 0, the server’s default contact limit will be used. If the
total contact records returned by the server is larger than this limit then it will not be
downloaded, and the device will be limited to remote search.
BroadSoft Contacts Search limit
The maximum remote search records that can be downloaded for the BroadSoft XSI server
directory. The valid range is from 0 to 2000. If set to 0, there is no limit. If the search result
total records exceed this value, it will not be downloaded, and you will need to narrow the
search scope.
Network Directories
Type Enable/Disable Broadsoft Network directories. The directory types are:
● Group Directory: Enable/Disable and rename the BroadWorks Xsi Group Directory
features on the phone. If keep the Name box blank, the phone will use the default name
“Group” for it.
● Enterprise Directory: Enable/Disable and rename the BroadWorks Xsi Enterprise
Directory features on the phone. If keep the Name box blank, the phone will use the
default name “Enterprise” for it.
To Next Page
Loading...
Need help?
General
