Public Mode
Enable Public Mode
Configures to turn on/off the public mode for hot desking feature.
The default setting is “Disabled”.
Public Mode Username Prefix Used as prefix of public mode login, when public mode is enabled
Public Mode Username Suffix Used as suffix of user name in public mode login, when public mode is enabled.
Allow Multiple Accounts
If set to "No", then after the user logs in to the public mode account on LCD, only the public
mode account can be used on the phone even though there are other configured SIP accounts.
If set to "Yes", then after the user logs in to the public mode account on LCD, other configured
SIP accounts on the phone can also be used.
Note: This option requires enabling public mode to take effect.
Enable Remote Synchronization
Enables phone to automatically download current account’s setting from remote server and
upload to the server.
Default setting is “Disabled”.
Server Type
Allows users to choose the type of the server (TFTP, FTP or HTTP) that stores personal files
of public account.
Default is “TFTP”
Server Path Defines server path that stores personal files of public account.
FTP/HTTP User Name Specifies User Name to access FTP/HTTP server.
FTP/HTTP Password Specifies Password to access FTP/HTTP server.
Login Timeout
Configures Login timeout in Minute in public mode.
The default value is 10.
Settings 🡪 Settings
General
Key Mode
If set to “Line Mode”, the amount of VPKs will be the amount of lines you can have. If set to
“Account Mode”, the lines will be grouped by account, so the VPKs could hold more lines in
one account.
For example, with line mode, when the line is in use, by pressing the VPK, nothing is going to
happen. In Account Mode, when the line is in use, by pressing the VPK, a new line will be
initiated.
The default setting is “Account Mode”.
Preferred Default Account
Selects the preferred default account when offhook/onhook dialing. When selected account is
unavailable, system will fall back to use the first available account instead.
Select Account from LCD Configures whether the user can use the Up/Down key to select an account in the idle screen.
Mute Key Functions While Idle
Specifies the function of mute key in idle. Default setting is “DND”.
When select “Idle Mute” and press Mute key while idle, the future incoming call will be
answered with mute. When select “Disabled”, Mute key will not take effect while idle.
The default setting is “DND”.
Last Call Forward Always Configures to enable storing the last input number when entering number in the call screen
after pressing the ForwardAll softkey.
To Next Page
Loading...
Need help?
General
