GXE502X User Manual 11/2/2009
52
o Session Expiration: The session timer enables SIP sessions to be periodically “refreshed”
via a SIP request. If enabled, before the session interval expires, the GXE502X will send a
SIP re-INVITE message to the SIP server. If this message is not replied to the session will
be terminated. This will avoid dropped sessions occupying the channel/bandwidth. Session
Expiration is the timer (in seconds) at which the session is considered timed out if no
successful session refresh transaction occurs beforehand. The default value is 180
seconds. Incorrect configuration could cause calls to be dropped or suspended.
o Min-SE: The minimum session expiration time (in seconds). The default value is 90
seconds.
o Call Routing Profile: Here you will select which routing profiles will be available to the
callers coming in from this peer system
When done, click the Submit button to add the extension or Cancel to go back.
Modify: Click the Modify button to the right of the row to select the peer system to be modified.
The modify peer system page will be load. This page allows users to modify all of the peer
system’s settings. When done, click the Submit button to save changes or Cancel to go back.
Delete: Click the Delete button on the far right to remove a peer system. Users will be prompted
for confirmation via a dialog box; click OK to confirm or Cancel to go back.
To Next Page
Loading...
Need help?
General
