GXE502X User Manual 11/2/2009
8
11) Call Forward
2
: Toggles Call Forwarding on and off. The factory default setting is OFF.
12) Call Forward To: The phone number the call will be forwarded to. It could be another
extension or a phone number.
13) Call Forward Rule: Determines the conditions under calls are forwarded.
14) Time for No-Answer-Forwarding: This is the timer that once expired will forward the calls to
the call forward number. Please make sure this timer is shorter than the voicemail timer if the
extension has Voicemail enabled.
Advanced Options:
15) RTP Port Detection: Toggles the GXE’s ability to detect RTP ports for remote extensions. This
field is set to “Yes” on factory default units.
16) Do Not Disturb: When enabled, calls will go directly to voicemail (when VM is enabled). Calls
will be rejected if voicemail is disabled.
17) Reboot Peer: When set to “Yes”, this feature will reboot registered (online) Grandstream
endpoints when the “Submit” button is clicked. The GXE502X can force extensions to reboot
via this method. This is the check-sync method used in Notify messages.
18) Session Keep Alive: This feature lets you configure different methods to keep the session
alive: None, Update, Re-Invite or Session Timer/Automatic. The factory default value is
Automatic. Grandstream recommends using the default setting.
19) Session Expiration: Please refer to RFC 4028 for detailed information
20) Min-SE: Please refer to RFC 4028 for detailed information
21) Call Routing Profile: These are the profiles the extension will be using to place outbound calls.
The administrator can select multiple call routing profiles from the available list to enable the
extension in particular to be able to use them. For example the administrator could have
created a local, cell phone, international and peers call routing profiles so he can decide what
kind of call each extension can make. Simply select or unselect each profile from the list to
activate them. Remember to click on the submit button.
22) Authorization Profile: The administrator can assign a predefined authority profile to this
extension so that they might require a password to perform certain calls.
23) Voice mail storage time: This is the period of time in days that the GXE-502X will keep you
voice/fax mail messages stored in flash memory. After the time has passed the GXE-502X will
delete the messages automatically to save space in memory. Default 30 days.
24) Entry voicemail option: This will select in between 3 options for accessing voicemail from the
user’s extension using the feature code for voice mail.
Extension and password: after dialing the feature, code the user will be prompted to enter both
the extension number and the password to access the extension’s voicemail.
Password only: after dialing the feature code, the user will be prompted to enter his password
only to listen to his voicemails
Direct Call: After dialing the feature code, the user will start listening his voicemails bypassing
all passwords.
Batch add extensions: The Batch Add button allows you to manually add multiple extensions.
The batch add configuration page lets you specify the range of extensions to add, as well as some
general settings to apply to them. You may also modify the settings of these extensions through
the Extensions Directory page. Click on the Submit button to add the extensions or Cancel to
abort the batch add process.
2
Note: Call forward can also be activated by using feature code.
To Next Page
Loading...
Need help?
General
