• Server Address
Specifies the address of the config server.
• Upgrade Via
Specifies the provision method.
• Username
Specifies the Username for the HTTP/HTTPS Server.
• Password
Specifies the Password for the HTTP/HTTPS Server.
• File Prefix
Specifies the prefix of the configuration file to be downloaded
and flashed into the phone.
• File Postfix
Specifies the postfix of the configuration file to be
downloaded and flashed into the phone.
o DHCP Opt43/66 Override FW
Enables the DHCP option 43 or 66 on the LAN side, to redirect to the
TFTP server.
o 3CX Auto Provision
Enables the phone to multicast a SUBSCRIBE for provision.
o Start Provision
Allows users to start provision at the moment.
• UCM Detect
Detect/connect UCM server to process auto-provision. Manually input
the IP and port of the UCM server phone wants to bind with or select
from the available UCM server in network.
• Authentication
o Admin Password
Indicates the password of the admin account.
o End User Password
Indicates the password of the user account.
o Test Password Strength
Turns on/off Test Password Strength feature. This will allow only
passwords with some constraints to ensure better security.
• Factory Functions
o Audio Loopback
To Next Page
Loading...
Need help?
General
