HT70X User manual
Version 1.0.9.4
If set to Yes, config file is authenticated before acceptance. This protects the
configuration from an unauthorized change.
The user specify SSL certificate used for SIP over TLS in X.509 format.
The user specify SSL private key used for SIP over TLS in X.509 format.
SIP TLS Private Key
Password
User specify password to protect the private key above.
User specify the Auto Configuration Server’s URL (TR-069 protocol)
User specify the ACS Username
User specify the ACS password
Default is No. If set to YES, device will send inform packets to the ACS
Frequency that the inform packets will be sent out to the ACS
Connection Request
Username
Set a user name for the ACS to connect to this device
Connection Request
Password
Set a password for the ACS to connect to this device
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
Country Specific
Deployment
Default is None. If choose any other option, FXS related settings will be applied to
most commonly used value in the configured the region.
Configuration option is set ring cadence on all FXS ports for all incoming calls.
(Syntax: c=on1/off1-on2/off2-on3/off3(only 3 cadences maximum)) Default is set
to c=2000/4000; (US standards)