Grandstream Networks WP820 - Figure 12: Aruba Central - DTIM

P a g e | 22
WP820 Wi-Fi Roaming Application Note
Figure 12: Aruba Central – DTIM
7. Configuring Radio Parameters
To configure RF parameters for the 2.4 GHz and 5 GHz radio bands on an Instant AP, complete the following
steps:
a. From the app selector, click Wireless Management.
b. From the group selector, select a group or a device.
c. On the left navigation pane, click RF. The RF page opens.
d. Click Radio.
e. Under 2.4 GHz, 5 GHz, or both, configure the parameters.