Grandstream Networks WP820 Application Note

P a g e | 44
WP820 Wi-Fi Roaming Application Note
 Clone Network?: If you wish to carry over your network settings from an already existing CloudTrax
network under your same account, you can choose to clone that networks' settings here.
2. Add access points to your network
Navigate to the Manage->Access Points screen. There are three options to add access points to your
network: click the "Add New" button to add access points one at a time by clicking on a map, or use the
down arrow to the right of that to add access points in bulk.
Figure 39: CloudTrax – Add Access Point
3. Configure your network
Each CloudTrax device can broadcast four unique SSIDs that users can connect to. Each of these SSIDs
are controlled independently in CloudTrax. Typically users have a mix of public SSIDs - with splash pages,
bandwidth throttling, DNS filtering and client isolation - and private SSIDs, with WPA Enterprise
authentication and access to LAN resources and other clients. When we created your network, we set the
first SSID to be public and the second SSID to be private, but you can adjust these any way you wish.

Grandstream Networks WP820 Specifications

General

Brand	Grandstream Networks
Model	WP820
Category	Cordless Telephone
Language	English