EasyManua.ls Logo

GRAPHTEC CE5000-120 - User Manual

GRAPHTEC CE5000-120
146 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CE5000-UM-251-22-9370
CE
5000 Series
SERVICE MANUAL
MANUAL NO. CE5000-UM-251
CUTTING PLOTTER

Table of Contents

Questions and Answers

  • B
    Brian PrestonAug 8, 2025
    What to do if the GRAPHTEC CE5000-120 control panel LED is not lighting?
    • C
      Christopher JeffersonAug 8, 2025
      If the LED lamp on your GRAPHTEC Plotter's control panel isn't lighting up, or the LCD screen remains blank, here's what you can check: * Ensure the power cord is properly connected to the plotter's AC line inlet. * Verify the FPC504302 flexible cable is securely connected to both the main board and the control panel. If not, connect it securely. * Check if the FPC504302 flexible cable is broken and replace it if necessary. * Try changing the AC line to ensure the electrical output is correct. * See if the power supply unit has a 5V output; if not, replace the power supply unit. * Consider replacing the main board.
  • M
    Mrs. Katherine LeeAug 17, 2025
    Why does my GRAPHTEC CE5000-120 display OFFSCALE and not cut some areas?
    • M
      Michael ReyesAug 17, 2025
      The 'OFFSCALE' message appears because the received data extends beyond the defined cutting or plotting area. To resolve this, adjust the cutting or plotting area settings and verify the page-length setting.
  • L
    Laura AllenAug 27, 2025
    How to fix a GRAPHTEC CE5000-120 Plotter when the STATUS lamp doesn't light up?
    • P
      Patrick WallaceAug 27, 2025
      If the STATUS lamp on your GRAPHTEC Plotter's control panel isn't lit, it indicates a power supply issue. Ensure the power cord is properly connected both to the plotter's AC line inlet and the electrical outlet.

GRAPHTEC CE5000-120 Specifications

General IconGeneral
BrandGRAPHTEC
ModelCE5000-120
CategoryPlotter
LanguageEnglish

Related product manuals