CE5000-UM-251-9370 3-8
3 OPER ATIONS
3.4 Description of Special Functions B
These functions are specied only in the special situations described below, and are not normally used.
• Display Language Setting (MENU LANGUAGE SELECTION)
This function sets the language used on the display� One of six languages can be selected: English,
French, German, Italian, Spanish, or Japanese�
(1) Turn the cutting plotter on while holding down the (ENTER) and (ORIGIN) keys simultaneously� The
special functions B setting menu is displayed�
DISPLAY ENGLISH
(2) Use the and keys to select the desired display language, and then press the (ENTER) key to
conrm. To cancel, press the (NEXT) or (PREV.) key.
(3) Once all the settings have been made, turn off the cutting plotter�
To Next Page
Loading...
