GRAPHTEC CE5000-120 - How to Replace the Power Supply

CE5000-UM-251-9370 6-35
6 DISASSEMBLY AND REASSEMBLY
6.2.16 How to Replace the Power Supply
How to detach the power supply
(1) Detach the front guide (see Subsection 6.1.5 or 6.1.6).
(2) Disconnect the cables from the connectors CN1 and CN2.
Power supply
M3L6 binding
head screw
(3) RemovethefourM3L6bindingheadscrewsholdingthepowersupplytothebottomofthechassis.
(4) Detachthepowersupplyfromthechassis.
How to reinstall the power supply
(1) Reattach in the reverse order in which it was detached.