CE5000-UM-251-9370 8-3
8 SERVICE MODES
8.3 Clear Setup Mode
This mode returns all the conditions to their default settings.
How to clear the setups
(1) Turn on the power while pressing the UP ARROW key to display the menu shown below.
HL metric ENG
(2) Select the default mode using the UP ARROW or DOWN ARROW key.
HL metric ENG
HP-GL, Metric unit, English
HL inch ENG
HP-GL, Inch unit, English
GL metric KANA
GP-GL, Metric unit, Japanese
(3) Press the ENTER key to store the setting.
Wait a few moments for the plotter to start the initialization routine.
(4) Turn off the power to the plotter when the initialization routine has nished.
To Next Page
Loading...
