CE5000-UM-251-9370 iii
54 13.02.20 Part number for the Drive Roller 120 was corrected. 4 -1,10 - 5 22
55 13.02.20 Part number for the Drive Roller 60 was corrected. 4 -1,10 - 3 22
56 13.02.20 Part number for the Drive Roller 40 was corrected. 4 -1,10 - 3 22
57 13.02.20 Part number for the Left Side Cover was corrected. 10 -1 22
58 13.02.20 Part number for the Front Guide 60 was corrected. 10 -1 22
59 13.02.20 Part number for the Front Guide 120 V2 was corrected. 10 -1,10-5 22
60 13.02.20 Part number for the Front Guide 120AP was corrected. 10-1,10-5 22
61 13.02.20 Part number for the Right Side Cover was corrected. 10 -1 22
62 13.02.20 Part number for the Front Guide 40 was corrected. 10-1 22
63 13.02.20
Part number for the Center Cover CE5000-120 was corrected.
10 -1 22
64 13.02.20
Part number for the Center Cover CE5000-60 was corrected.
10 -1 22
65 13.02.20
Part number for the Center Cover CE5000-40 was corrected.
10 -1 22
66 13.02.20 Part number for the Rear Guide 120 V2 was corrected. 10-1,10-6 22
67 13.02.20 Part number for the Caution Label was corrected. 10-1 22
68 13.02.20
Part number for the Y Drive Belt 100TN15-5G was corrected.
10-3 22
69 13.02.20 Part number for the X Drive Belt 82TN15-8G was corrected. 10-3 22
70 13.02.20
Part number for the Y Drive Belt 100TN15-10G was corrected.
10-5 22
71 13.02.20
Part number for the X Drive Belt, 82TN15-10G was corrected.
10-5 22
72 13.02.20 Part number for the Cam Shaft 120 was corrected. 10-5 22
73 13.02.20 Part number for the Rubber Spacer was corrected. 10-5 22
74 13.02.20 Part number for the Spring DE-646 was corrected. 10-5 22
75 13.02.20 Part number for the Front Media Guide was corrected. 10-5 22
76 13.02.20
Part number for the Center Cover CE5000-120 was corrected.
10-6 22
77 13.02.20
Part number for the
Thumb Screw L10
was corrected.
10-7 22
78 13.02.20
Part number for the Registration Mark Sensor Bracket A was corrected.
10-7 22
80 13.02.20
Part number for the CA504301A (Power Supply to Power Switch) was corrected.
10-9 22
81 13.02.20
Part number for the CA504310 (Power Supply to Main Board) was corrected.
10-9 22
82 13.02.20
Part number for the CA504308 (Registration Mark Sensor to Y Relay) was corrected.
10-9 22
83 13.02.20
Part number for the FPC504306 (Push Roller Sensor Flexible Cable) was corrected.
10-9 22
84 13.02.20
Part number for the CA504311 (X Motor Extension Cable) was corrected.
10-9 22
85 13.02.20
Part number for the CA504312 (X Motor Encoder Extension Cable) was corrected.
10-9 22
86 13.02.20
Part number for the CA504325 (Y-motor Encoder Cable) was corrected.
10-9 22
To Next Page
Loading...
