GRAPHTEC CE5000-120 - Page 68

CE5000-UM-251-9370 6-30
6 DISASSEMBLY AND REASSEMBLY
(6) FittheY-exiblecableintotheY-railasshownbelow.TheY-exiblecableshouldn’ttouchtheleftside
plate.Allowa3mmspacebetweentheleftendoftheY-exiblecableandtheleftsideplate.
Allow a 3-mm space between the left end
of the Y-flexible cable and the left side plate.
(7) SecuretheY-exiblecableontotheexiblecableguideoftheY-railusingdouble-sidedadhesivetape.
(8) Reattachtheotherpartsinthereverseorderinwhichtheyweredetached.