GRAPHTEC FC8600-130 - Page 171

7-14 7-15
6
Press the [3] key (X).
X DISTANCE ADJUST setting screen is displayed.
Supplement
Setting range for adjustment value is -2.00% to
+2.00%.
7
Press the POSITION (
▲▼
) key and increase or decrease the
setting value.
POSITION
8
Confirm the setting value, and press the POSITION (
◄
) key
(PREVIOUS).
POSITION
X DISTANCE ADJUST will be set, and it will return to DISTANCE
ADJUST screen.
Supplement
Setting range for adjustment value is -2.00% to
+2.00%.
9
Press the [4] key (Y).
Y DISTANCE ADJUST setting screen is displayed.
10
Press the POSITION (
▲▼
) key and increase or decrease the Y
DISTANCE ADJUST value.
POSITION
11
Confirm the setting value, and press the POSITION (
◄
) key
(PREVIOUS).
POSITION
Y DISTANCE ADJUST will be set, and it will return to DISTANCE
ADJUST screen.
Supplement
It will return to CONDITION screen (3/3) without
changing the settings when you press the
POSITION (
▼
) key (CANCEL).
12
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (3/3).
13
Press the [CONDITION] key.
It will return to default screen.