8-10 8-11
Supplement
Values that can be set are AUTO, 10, 20, 30,
40, 50, and 60.
It will be same speed as tool is lowered when
AUTO is selected.
l
l
5
Press the POSITION (
▲▼
) key and increase or decrease the
setting value.
Supplement
It will return to TOOLS SETTING screen (2/3)
without changing the settings when you press the
POSITION (
◄
) key
(CANCEL)
.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (2/3).
7
Press the [MENU] key.
It will return to default screen.
To Next Page
Loading...
