3-45
CHAPTER 3 Settings and Measurement
<Description of wireless sensor display>
(2) Measurement module 1
(1) Wireless sensor display
The 1-1 to 1-8 of WL indicates the wireless sensor No. 1. Because
ve wireless sensors can be connected, the fth sensors are
indicated as the 5-1 to 5-8.
The information of GS sensor and terminal/addapter connected to
the GL100-WL is displayed.
(3) Measurement module 2
The information when two types of GS sensor and terminal/
addapter are connected with GL100-WL+GS-DPA (Branch adapter
for GS) is displayed.
The information of the Setting screen varies depending on the type of GS sensor and terminal/addapter to
be connected.
When the data of GL100-WL, Standard terminal and Withstand high-voltage high-precision terminal/
Screwless terminal are captured, a few of the data may be delayed by reason of the data processing of the
GL100-WL and the connected GL sensor and terminal/adapter.
Please consider the data lag when the data is tried to conrm and replay.
For details on the wireless connection between the GL840 and GL100-WL, refer to “(4) Interface settings”
in “3.4 Setting Menus” and the example of operating procedures.
To Next Page
Loading...
