3-17
CHAPTER 3 Settings and Measurement
3.3 Operation Modes
You can check the system operation status in the status message display.
< Free Running > < Capturing > <Replaying while capturing data> < Replaying >
Operation Description Simple message display
Free Running Startup status, or data is not being captured. Free Running
Capturing The data is being captured. Capturing the data to SD CARD1 or SD
CARD2
Replaying while capturing
data
Replaying the data during capture and displaying the
current waveform
Capturing the data to SD CARD1 or SD
CARD2
Replaying Captured data is being replayed The data in the SD CARD1 or SD CARD2 is
being replayed.
Operation status transition
[START/STOP] key
Free Running
ReplayingCapturing
Replay while capturing
2-screen replaying display
[QUIT] key
[START/STOP] key [REVIEW] key
[QUIT] key or [REVIEW] key[REVIEW] key
[DISPL AY] key [DISPL AY] key
Integrated bar graph display
* Only when there is the integrated CH.
[DISPL AY] key
To Next Page
Loading...
