GRAPHTEC GL840 - List of Options

4-12
CHAPTER 4 Specication
List of Options
Item Model Description
Input/output cable for GL B-513 2 m long (no clip on end of cable)
DC drive cable B-514 2 m long (no clip on end of cable)
Humidity sensor *
1
B-530 3 m long (with a dedicated power connector)
Input terminal (Multi-inputs) B-564 20CH Standard terminal
Input terminal (Withstand voltage) B-565 20CH Withstand high-voltage high-precision terminal
Screwless input terminal B-564SL 20ch Screwless terminal
Base unit for input terminal B-566 Extension terminal base unit, connection plate, screws
Connection cable for extension
terminal
B-567-05 Connection cable (50 cm)
B-567-20 Connection cable (2 m)
Wireless LAN unit *
2
B-568 Wireless LAN
Battery pack B-569 7. 2V/2900mAh
Bracket for DIN rail (GL840 main body) B-570 Built to order
Bracket for DIN rail B-540 Built to order
Shunt resistor B-551-10 Built to order. 10 pcs/set
250 Ω, Rated power of 1 W, Maximum service voltage of 15.8 V
Cover B-578 Protective cover
Input terminal cover B-588 Protective cover
Voltage & Temp input terminal GS-4VT Terminal for 4ch voltage / temperature measurement
(Thermocouple only)
Acceleration & Temp sensor GS-3AT Sensor for 3-axis acceleration / temperature measurement
Thermistor input terminal GS-4TSR Terminal for 4ch thermistor temperature measurement
(Thermistor sensor for GS)
AC current sensor adapter GS-DPA-AC Adapter for 2ch AC power measurement
(AC current sensor only)
Carbon Dioxide (CO2) sensor GS-CO2 Sensor for CO2 measurement
Illuminance & UV sensor GS-LXUV Sensor for 1ch Illuminance / 1ch ultraviolet measurement
Temp & Humidity sensor GS-TH Sensor for temperature and humidity measurement
Dual port adapter GS-DPA Adapter for 2ch sensors
Thermistor sensor (Normal type) GS-103AT-4P GS-4TSR only (approx. 3 m)
Thermistor (-40 to 105°C)
Thermistor sensor (Ultrathin type) GS-103JT-4P GS-4TSR only (approx. 3 m)
Ultra-thin shape thermistor (-40 to 120°C)
AC current sensor (50A) GS-AC50A GS-DPA-AC-dedicated CT (50A)
AC current sensor (100A) GS-AC100A GS-DPA-AC-dedicated CT (100A)
AC current sensor (200A) GS-AC200A GS-DPA-AC-dedicated CT (200A)
Module extension cable GS-EXC 1.5 m extension cable
(Between the GL840 and sensor, between the branch adapter
and sensor)
*1 Allowable temperature range: -25 to +80°C
*2 It is available in limited region.