3-18
CHAPTER 3 Settings and Measurement
(1) Free Running
In free-running, you primarily perform the settings for data capture.
You can check the currently input signal in the waveform or digital value.
Main operations available during Free Running
Measuement parameters settings The [MENU] key is used to change various setting items in conguration
menus.
SPAN/TRACE/POSITION The [SPAN/TRACE/POSITION] key is used to change settings.
Display mode The [DISPLAY] key is used to change the display mode.
File operations The [FILE] key is used to perform le-related operations.
Data replay The [REVIEW] key is used to replay captured data.
Time axis change The [TIME/DIV] key is used to change the time axis scale..
Operation of screen display
The information in the screen display is changed by switching the channel.
The operation of screen display can be performed during free-running, capturing, and replaying.
<Screen display when the CH1 is selected
on the MONITOR screen during free-running>
The scale of the selected
channel is indicated.
The selected channel is enlarged.
The display channel can be
switched by operating the
keys.
The selected channel is displayed without coloration.
To Next Page
Loading...
