3-19
CHAPTER 3 Settings and Measurement
(2) Capturing
Capture destination and le name
Time of Capturing
The remaining capacity of memory
(Remaining time more than 99999 hours is
displayed as "++++:++:++".)
The captured data is saved in the internal memory (SD1) or SD CARD (SD2) during data capture.
You cannot use the [MENU] key to change the setting.
Operations available during capture
SPAN/TRACE/POSITION change Change the settings with the [SPAN/TRACE/POSITION] key.
Screen display mode switch Used to change the screen mode with the [DISPLAY] key.
Replay while capturing Replay the data captured while capturing
Save to device Save to the device with the [FILE] key during data capture.
Setting check Display the setting information with the [MENU] key.
Time axis change Change the time axis with the [TIME/DIV] key.
(3) Data replaying during capture
Displays the voltage at a point
indicated by Cursor A or B or the
selected cursor.
Displays the measurement time at a
point indicated by Cursor A or B or the
selected cursor.
The captured data while capturing can be replayed by pressing the [REVIEW] key.
You can switch between the 1-screen (replayed data) and 2-screen (replayed data during data capture) by
pressing the [DISPLAY] key.
Use the Direction keys (
) to move the cursor and captured data to check digital values.
Main operations to replay during data capture
Cursor movement The [CURSOR] key is used to switch between cursors A and B.
The
or
,
keys are used to move the cursors.
Save to device The save to the device can be performed from the [FILE] menu.
(The data up to the present or between the cursors can be saved in a
separate le during data capture.)
Screen copy Copy the screen with the [FILE] key.
Switching between 1-screen and 2-screen You can switch between 1-screen and 2-screen during data replaying by
pressing the [DISPLAY] key.
Time axis change Change the time axis with the [TIME/DIV] key.
To Next Page
Loading...
