3-55
CHAPTER 3 Settings and Measurement
(3) TRIG settings
This is used to specify trigger conditions and alarms.
Setting Selections available
Start Side Source Settings Off, Level, Alarm, External Input, Time, Day, Duration
[Level] Mode Analog: Off, H, L, Window In, Window Out
Logic: Off,
H,
L
Pulse: Off,
H,
L, Window In, Window Out
Combination Level OR, Level AND, Edge OR, Edge AND
Level Set numeric value
[Alarm] Alarm port
number
1, 2, 3, 4
[Date] Date From 2005.1.1 to 2035.12.31
Time From 0:0:0 to 23:59:59
[Weekly] Day of week Off or On setting for each of Sunday through Saturday
Time From 0:0:0 to 23:59:59
[Duration] From 0:0:1 to 9999:59:59
Stop Side Source Settings Off, Level, Alarm, External Input, Time, Day, Duration
[Level] Mode Analog: Off, H, L, Window In, Window Out
Logic: Off,
H,
L
Pulse: Off,
H,
L, Window In, Window Out
Combination Level OR, Level AND, Edge OR, Edge AND
Level Set numeric value
[Alarm] Alarm port
number
1, 2, 3, 4
[Date] Date From 2005.1.1 to 2035.12.31
Time From 0:0:0 to 23:59:59
[Weekly] Day of week Off or On setting for each of Sunday through Saturday
Time From 0:0:0 to 23:59:59
[Duration] From 0:0:1 to 9999:59:59
Repeated Capturing Off, On
Alarm Level
Settings
Mode Analog: Off, H, L, Window In, Window Out
Logic: Off,
H,
L
Pulse: Off,
H,
L, Window In, Window Out
Level Set numeric value
Output 1, 2, 3, 4
Detection Method Level, Edge
Alarm Hold Held or Not held
Send Burnout Alarm Sent or not sent
To Next Page
Loading...
