2-8
CHAPTER 2 Checks and Preparation
b .....................................Dedicated terminal when connecting resistance bulb
* Resistance bulb input terminals A (+) and B (-) are isolated within each channel. Terminal b is shorted
within all channels.
Item Description
Input conguration Isolated input, scanning
Measurement range 20, 50, 100, 200, 500 mV/F.S.; 1, 2, 5, 10, 20, 50, 100 V; 1-5V/F.S.
Thermocouples K, J, E, T, R, S, B, N, C (WRe 5-26)
Resistance bulb Pt100, JPt100, Pt1000 (IEC751)
A/D resolution 16-bit (Effective resolution: Approx. 1/40,000 of the +/- range)
Filter Off, 2, 5, 10, 20, 40
Filter operation is on a moving average basis.
The average value of the set sampling count is used.
If the sample interval exceeds 30 seconds, the average value of data
obtained in a sub-sample (30 seconds) is used.
To Next Page
Loading...
