2-29
CHAPTER 2 Checks and Preparation
(3) Connect the extension terminal connection cable to the extension terminal base.
* Insert the cable connector until it is securely locked.
* Connect in accordance with the connector shape.
Extension terminal connection cable
(4) Connect one end of the extension terminal connection cable to the GL840.
* Insert the cable connector until it is securely locked.
Extension terminal connection cable
Do not touch.
While the signal is input to the direct-connected terminal, please do not touch the connector pins and
the protruding part next to the connector.
•
How to remove the expansion terminal connection cable
Lock release lever
When you want to remove the expansion terminal connection cable from the GL840 or extension terminal
base, please note the following.
•
Always press the both sides of the lock release lever and pull out straightly in a state where the lock is
released.
•
Please do not forcibly remove or do not pull out in a state where the lock is not released by pressing only
the one side of the lock release lever.
It may cause a connection failure of connector, please be careful when you remove it.
To Next Page
Loading...
